Subaru Legacy: “up” and “down” switch
With radio mode selected
Press the switch to the “
” or “
”
side briefly to skip to a preset channel. Press the switch to the “”
or “” side for more than 0.5 second
to seek the next receivable station and stop at it.
That station’s frequency will be indicated on the audio display.
With CD mode selected
Press the switch to the “” side
to skip forward in the track/file (track) order. Press the switch to the “”
side to skip back ward in the track/file (track) order. The track/file (track) number
will be shown on the audio display.
With SAT mode selected
Press the switch to the “” side
to skip forward in the channel order. Press the switch to the “”
side to skip backward in the channel order. When the switch is briefly pressed,
the channel will skip every 1 channel. When the switch is pressed for more than
0.5 second, the channel will skip every 10 channels. The channel will be shown on
the audio display.
MODE button
This button is used to select the desired audio mode. Each time it is pressed,
the mode changes to the next one in the following sequence.
*1: The frequency last received in the selected waveba ...
Volume control switch
Press the switch to the “+” side to increase the volume. Press the switch to
the “−” side to reduce the volume. A number indicating the volume will be shown
on the audio display. ...
See also:
Shifting out of Park
Automatic Transmission
Shift Lock
The vehicle has an automatic
transmission shift lock control
system. The shift lock control
system is designed to:
• Prevent ignition key removal
unless ...
Exterior Care
Cleaning Exterior Lamps/ Lenses
Use only lukewarm or cold water, a soft cloth, and a car washing soap to clean exterior lamps and lenses.
Follow instructions under “Washing the Vehicle” later in ...
Extreme Cold Weather (Below –20°F Or 29°C)
To ensure reliable starting at these temperatures, use of
an externally powered electric engine block heater (available
from your dealer) is recommended. ...
