Nissan Altima: Air cleaner - Maintenance and do-it-yourself - Nissan Altima Owners ManualNissan Altima: Air cleaner

QR25DE

QR25DE

NOTE:

The air cleaner filter should not be cleaned and reused.

Replace the air cleaner filter according to the maintenance log shown in the “Warranty Information and Maintenance Booklet.”

To remove the air cleaner filter:

1 Unlatch the clips and move the air cleaner cover upward.

2 Remove the air cleaner filter.

VQ35DE

VQ35DE

3 Wipe the inside of the air cleaner filter housing and the cover with a damp cloth.

NOTE:

After installing a new air cleaner, make sure the air cleaner cover is seated in the housing and latch the clips.

WARNING

● Operating the engine with the air cleaner removed can cause you or others to be burned. The air cleaner not only cleans the air, it stops the flame if the engine backfires. If it isn’t there, and the engine backfires, you could be burned. Do not drive with the air cleaner removed, and be careful when working on the engine with the air cleaner removed.

● Never pour fuel into the throttle body or attempt to start the engine with the air cleaner removed. Doing so could result in serious injury.

Spark plugs
It is not necessary to replace platinum-tipped A spark plugs as frequently as conventional type spark plugs because they last much longer. Follow the maintenance log shown in the “NISSAN Servi ...

In-cabin microfilter
The in-cabin microfilter restricts the entry of airborne dust and pollen particles and reduces some objectionable outside odors. The filter is located behind the glove box. Refer to the “NISSAN ...

See also:

Front airbag deployment
The front airbags are designed to deploy during certain frontal or front-angular collisions, impacts, or decelerations, depending on the crash severity, angle, speed and object impacted. The ...

Volume Control
VOL/ (Volume/Power): Turn to adjust the volume. (Phone/Mute): For vehicles with OnStar®, press and hold to mute the infotainment system. Press and hold again, or turn the VOL/ knob t ...

Fan speed control dial
The fan operates only when the ignition switch is turned to the “ON” position. The fan speed control dial is used to select four fan speeds. ...