Subaru Legacy: Anti-entrapment function
CAUTION
● Never attempt to test this function using fingers, hands or other parts of
your body.
● The anti-entrapment function may not operate properly if some object gets trapped
just before the window fully closes.
NOTE
● If a window detects an impact similar to that caused by trapping an object
(for example, when the vehicle encounters a deep pothole), the anti-entrapment function
may operate.
● The window cannot be operated for a few seconds after the anti-entrapment function
operates.
● If the vehicle’s battery is disconnected due to situations such as battery or
fuse replacement, the antientrapment function is deactivated.
Initialize the power window to reactivate the anti-entrapment function. Refer to “Initialization of power window” F2-23.
While closing automatically, if the window senses a substantial enough object trapped between the window and the window frame, it automatically moves down slightly and stops.
Operating the driver’s window
1) Automatically open/close
2) Open/close
To open:
Press the switch down lightly and hold it. The window will open as long as the
switch is held.
This switch also has a one-touch auto down fun ...
Operating the passengers’ windows
To open:
Press the appropriate switch down and hold it until the window reaches the desired
position.
To close:
Pull the switch up and hold it until the window reaches the desired position. ...
See also:
Owner’s responsibility
NOTICE
Maintenance Service and Record Retention are the owner's responsibility.
You should retain documents that show proper maintenance has been performed on
your vehicle in accordance with t ...
Vehicle information
Owner's Manual
Computer
Vehicle
...
Vehicle symbols
There are some of the symbols you may see on your vehicle.
For warning and indicator lights, refer to “Warning and indicator lights” F19.
...
