Chrysler 200: Auto Window Up With Anti-Pinch Protection — If Equipped - Power Windows - Things to know before starting your vehicle - Chrysler 200 Owners ManualChrysler 200: Auto Window Up With Anti-Pinch Protection — If Equipped

Lift the window switch fully upward to the second detent, release, and the window will go up automatically.

To cancel the Auto Up movement, operate the switch either in the up or down direction and release the switch.

To close the window part way, lift the window switch to the first detent and release it when you want the window to stop.

NOTE:
• If the window runs into any obstacle during autoclosure, anti-pinch protection will reverse the window direction and then go back down. Remove the obstacle and use the window switch again to close the window.

• Any impact due to rough road conditions may trigger the auto reverse function unexpectedly during autoclosure.

If this happens, pull the switch lightly to the first detent and hold to close window manually.

WARNING!
When the window is almost closed, there is no anti-pinch protection. To avoid personal injury, be sure to clear your arms, hands, fingers and all objects from the window path before closing.

Reset Auto Up

Anytime the vehicle battery goes dead, the Auto Up function will be disabled. To reactivate the Auto Up feature, pull the window switch up to close the window completely and continue to hold the switch up for an additional two seconds after the window is closed.

    Auto Window Down — If Equipped
    The front window controls on the driver and passenger door trim panels have an Auto-Down feature. These switches are labeled AUTO to indicate this capability. Push the window switch past the firs ...

    Window Lockout Switch
    The window lockout switch on the driver’s door allows you to disable the window control on the other doors. To disable the window controls on the other doors, press the window LOCK button. To ...

    See also:

    Engine compartment — 2.4L
    ENGINE COMPARTMENT — 2.4L 1 — Engine Coolant Reservoir. 7 — Air Cleaner Filter. 2 — Power Steering Fluid Reservoir. 8 — Engine Oil Fill. 3 — Automatic Transmission Dipstick. 9 †...

    Removing spots
    Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the surface of the paint to avoid lasting damage or staining. Special cleaning products are available a ...

    Drive belts
    It is unnecessary to check the deflection of the drive belt periodically because your engine is equipped with an automatic belt tension adjuster. However, replacement of the belt should be done ac ...