Mercedes-Benz E-Class: Automatic car wash - Exterior care - Care - Maintenance and care - Mercedes-Benz E-Class Owners ManualMercedes-Benz E-Class: Automatic car wash

WARNING
Braking efficiency is reduced after washing the vehicle. This could cause an accident. For this reason, you must drive particularly carefully after washing the vehicle until the brakes have dried.

WARNING
The vehicle is braked when the HOLD function or DISTRONIC PLUS is activated. Therefore, deactivate the HOLD function and DISTRONIC PLUS before the vehicle is washed in an automatic car wash.

You can wash the vehicle in an automatic car wash from the very start.

Never clean your vehicle in a Touchless Automatic Car Wash as these use special cleaning agents. These cleaning agents can damage the paintwork or plastic parts.

If the vehicle is very dirty, pre-wash it before cleaning it in an automatic car wash.

In car washes with a towing mechanism, make sure that the automatic transmission is in transmission position N, otherwise the vehicle could be damaged.

 - Vehicles with a SmartKey:

Do not remove the SmartKey from the ignition lock. Do not open the driver's door or front-passenger door when the engine is switched off. Otherwise, the automatic transmission selects park position P automatically and locks the wheels. You can prevent this by shifting the automatic transmission to N beforehand.

 - Vehicles with KEYLESS-GO:

Do not open the driver's door or frontpassenger door when the engine is switched off. Otherwise, the automatic transmission selects park position P automatically and locks the wheels.

Observe the following to make sure that the automatic transmission stays in position N:

•► Make sure the vehicle is stationary and the ignition is switched off.

•► Turn the SmartKey to position 2 in the ignition lock.

Use the SmartKey instead of the Start/ Stop button on vehicles with KEYLESS-GO.

•► Depress and hold the brake pedal.

•► Shift the automatic transmission to position N.

•► Release the brake pedal.

•► Release the parking brake.

•► Switch off the ignition and leave the SmartKey in the ignition lock.

Make sure that:

 - the side windows and the sliding sunroof are fully closed.
 - the ventilation/heating is switched off (the OFF button has been pressed).
 - the windshield wiper switch is in position 0.

Otherwise, the vehicle might be damaged.

After using an automatic car wash, wipe off wax from the windshield and the wiper blades. This will prevent smears and reduce wiping noises caused by residue on the windshield.

    Washing by hand
    Carefully remove all deposits of road salt as soon as possible when driving in winter. Also, clean the insides of the wheels when washing the underbody of the vehicle. •► Do not use hot ...

    See also:

    Front: automatic transmission
    Opening Press on the cover. Emptying Take out the insert. Lighter Press on the cover Push in the lighter. The lighter can be removed as soon as it pops back out. Danger of burns Only ...

    Vehicle Load Limits
    It is very important to know how much weight the vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo and all nonfactory-installed optio ...

    Checking engine oil level
    1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature. 3. Turn off the engine. Wait more than 10 minutes fo ...