Mercedes-Benz E-Class: Automatic engine switch-off - ECO start/stop function - Driving - Driving and parking - Mercedes-Benz E-Class Owners ManualMercedes-Benz E-Class: Automatic engine switch-off

The ECO start/stop function switches the engine off automatically if the vehicle is braked to a standstill and the brake remains depressed with the transmission in position D or N.

You can still activate the HOLD function when the vehicle is stationary, even if the engine has been switched off automatically. It is then not necessary to continue applying the brakes during the automatic stop phase. When you depress the accelerator pedal, the engine starts automatically and the braking effect of the HOLD function is deactivated. Depress the accelerator pedal carefully, as the engine must be started first.

The engine is only switched off if:

 - the outside temperature is within the range which is suitable for the system.
 - the engine is at normal operating temperature.
 - the set temperature for the vehicle interior has been reached.
 - the battery is sufficiently charged.
 - the system detects that the windshield is not fogged up when the air-conditioning system is switched on.
 - the hood is closed.
 - no engine-relevant diagnostics are active.
 - the vehicle is not being steered.
 - the front door is closed and the seat belt is fastened.

During automatic engine switch-off, the climate control system only operates at a reduced capacity. If you require full climate control capacity, the ECO start/stop function can be deactivated by pressing the ECO button

    General information
    The ECO start/stop function is only available for the E 63 AMG. The ECO start/stop function is only available in drive program C. The ECO start/stop function switches the engine off automatica ...

    Automatic engine start
    The engine is started automatically if you:  - release the brake pedal when HOLD is not activated and the transmission is in position D or N  - shift the transmission to position R ...

    See also:

    Warning Lights, Gauges, and Indicators
    Warning lights and gauges can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement. Paying attention to the warning lights and gauges could preve ...

    Battery
    The battery supplies power to start the engine and operate any additional electrical accessories. • To avoid break-down or failure to start the vehicle, maintain a battery with full crankin ...

    Removing the Spare Tire and Tools
    The equipment you need is located in the trunk. 1. Open the trunk. 2. Remove the spare tire cover. 3. Turn the retainer nut counterclockwise and remove the spare tire. 4. Place the spare t ...