Nissan Altima: Cooling or heating (AUTO)
This mode may be normally used all year round as the system automatically works to keep a constant temperature. Air flow distribution and fan speed are also controlled automatically.
1. Press the AUTO button on.
2. Turn the driver’s side temperature control
dial to the left or right to set the desired
temperature. Driver and passenger temperatures
can be set independently. Press
DUAL or turn the passenger temperature
control dial to the left or right to activate dual
climate control functions. Turn the passenger’s
side temperature control dial to the left
or right to set the desired passenger’s temperature.
● Adjust the temperature dial to about 75°F (24°C) for normal operation.
● The temperature of the passenger compartment will be maintained automatically. Air flow distribution, fan speed and A/C on/off are also controlled automatically.
● A visible mist may be seen coming from the vents in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.
Dehumidified defrosting or defogging
1. Press the defroster control button to turn the system on. The indicator light in the button will illuminate. 2. Turn the temperature dial to the left or right to set the desired temperature. ...See also:
Speed-dependent steering force*
Steering force increases with the speed of the vehicle to give the driver enhanced
sensitivity. At low speed the vehicle is easy to steer in order to facilitate parking,
etc.
Steering force can b ...
Silencing the horn beep feature
If desired, the horn beep feature can be deactivated
using the Intelligent Key.
To deactivate: Press and hold the
and buttons for at least 2 seconds.
The hazard warning lights will flash 3 tim ...
Important safety notes
WARNING
In order to avoid possible loss of vehicle
control, all seat, head restraint, steering
wheel and rear view mirror adjustments, as
well as fastening of seat belts, must be done
bef ...