Chrysler 200: Electronic Speed Control – If Equipped - Towing Tips - Trailer Towing - Starting and operating - Chrysler 200 Owners ManualChrysler 200: Electronic Speed Control – If Equipped

• Do not use in hilly terrain or with heavy loads.

• When using the speed control, if you experience speed drops greater than 10 mph (16 km/h), disengage until you can get back to cruising speed.

• Use speed control in flat terrain and with light loads to maximize fuel efficiency.

    Automatic Transmission
    The DRIVE range can be selected when towing. However, if frequent shifting occurs, select the 3 range (for a four-speed automatic) or select a lower gear using the AutoStick shift control. NOTE ...

    Cooling System
    To reduce potential for engine and transmission overheating, take the following actions: • City Driving When stopped for short periods of time, shift the transmission into NEUTRAL and increase ...

    See also:

    Off-road recovery
    While driving, the right side or left side wheels may unintentionally leave the road surface. If this occurs, maintain control of the vehicle by following the procedure below. Please note that thi ...

    High Voltage Safety Information
    eAssist vehicles have a standard 12-volt battery and a high voltage battery. Only a trained service technician with the proper knowledge and tools should inspect, test, or replace the high v ...

    Detachable key blade
    Each remote key or PCC contains a detachable metal key blade for mechanically locking or unlocking the driver's door and the glove compartment, and to enable the valet locking function. See pa ...