Nissan Maxima: Fuses - Maintenance and do-it-yourself - Nissan Maxima Owners ManualNissan Maxima: Fuses

Two types of fuses are used. Type (A) is used in the fuse boxes in the engine

Two types of fuses are used. Type (A) is used in the fuse boxes in the engine compartment. Type (B)- is used in the passenger compartment fuse box.

Type A fuses are provided as spare fuses. They are stored in the passenger compartment fuse box.

Type A fuses can be installed in the engine compartment and passenger compartment fuse boxes.

If a type A fuse is used to replace a type B fuse, the type A fuse will not be

If a type A fuse is used to replace a type B fuse, the type A fuse will not be level with the fuse pocket as shown in the illustration. This will not affect the performance of the fuse. Make sure the fuse is installed in the fuse box securely.

Type B fuses cannot be installed in the underhood fuse boxes. Only use type A fuses in the underhood fuse boxes.

    Brakes
    If the brakes do not operate properly, have the brakes checked by a NISSAN dealer. Self-adjusting brakes Your vehicle is equipped with self-adjusting brakes. The front and rear disc-type brakes sel ...

    Engine compartment
    CAUTION: Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not ...

    See also:

    How to park with predicted course lines
    WARNING: - Always turn and check that it is safe to do so before backing up. Always back up slowly. - Use the displayed lines as a reference. The lines are highly affected by the number of occupa ...

    Operating tips
    ● Keep the windows and moonroof closed while the air conditioner is in operation. ● After parking in the sun, drive for 2 or 3 minutes with the windows open to vent hot air from the pa ...

    Modifying Your Vehicle
    Removing parts from your vehicle, or replacing components with non-Honda components could seriously affect your vehicle’s handling, stability, and reliability. Some examples are: Lowering ...