Mercedes-Benz E-Class: High-beam headlamps - Combination switch - Exterior lighting - Lights and windshield wipers - Mercedes-Benz E-Class Owners ManualMercedes-Benz E-Class: High-beam headlamps

•► To switch on the high-beam headlamps: turn the SmartKey in the ignition lock to position 2 or start the engine.

•► Turn the light switch to or . or •► Press the combination switch beyond the.

•► Press the combination switch beyond the pressure point in the direction of arrow 1.

In the headlamps are only switched on when it is position, the high-beam headlamps are only switched on when it is dark and the engine is running.

The instrument indicator lamp in the instrument cluster lights up when the high-beam headlamps are switched on.

•► To switch off the high-beam headlamps: move the combination switch back to its normal position.

The instrument indicator lamp in the instrument cluster goes out.

    Turn signals
    1. High-beam headlamps 2. Right turn signal 3. High-beam flasher 4. Left turn signal •► To indicate briefly: press the combination switch briefly to the pressure point in the ...

    High-beam flasher
    •► To switch on: turn the SmartKey in the ignition lock to position 1 or 2 or start the engine. •► Pull the combination switch in the direction of arrow 3. ...

    See also:

    DSC OFF
    When DSC OFF, is active, driving stability is limited during acceleration and when driving in bends. ...

    Washing
    Wash dirt off with a wet sponge and plenty of water. Clean the vehicle thoroughly using a mild soap, a special vehicle soap or general purpose dishwashing liquid mixed with clean, lukewarm (never ...

    Reverse
    The vehicle must be stationary when position R is selected. ...