Toyota Camry: Installation with LATCH system
Type A
Widen the gap between the seat cushion and seatback slightly.
Latch the hooks of the lower straps onto the LATCH anchors.
If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor.
For owners in Canada:
The symbol on a child restraint system indicates the presence of a lower connector system.
Type B
Widen the gap between the seat cushion and seatback slightly.
Latch the buckles onto the LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor.
For owners in Canada:
The symbol on a child restraint system indicates the presence of a lower connector system.
Installing child restraints
Follow the child restraint system manufacturer's instructions. Firmly secure child restraints to the seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a chi ...Installing child restraints using a seat belt (child restraint lock function belt)
■ Rear facing ⎯ Infant seat/convertible seat Place the child restraint system on the rear seat facing the rear of the vehicle. Run the seat belt through the child restraint sys ...See also:
Automatic transmission - Vehicles With: 4-Speed Automatic Transmission
(4F27E)
Selector lever positionsPark PReverse RNeutral NDrive D2nd Gear 21st Gear 1
WARNING:
Apply the brakes before moving theselector lever and keep themapplied until you are ready to moveoff.
Note: A co ...
Checking the battery
•► Press the or
button.
The battery is working properly if battery
check lamp 1 lights up briefly
If battery check lamp 1 does not light up
briefly during the test, the battery is ...
Skip channel selection
When in the SAT mode, press the “SEEK” button “”
or “” continuously to change to the
channel selection mode. Pressing the “SEEK” button “”
changes the channel up by 10 step ...