Chrysler 200: Jack Location - Jacking And Tire Changing - What to do in emergencies - Chrysler 200 Owners ManualChrysler 200: Jack Location

The jack and jack-handle are stowed under the load floor in the trunk.

    Jacking And Tire Changing
    WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changin ...

    Spare Tire Stowage
    The compact spare tire is stowed under the rear load floor in the trunk. Spare Tire Removal Lift up the load floor cover and remove the hold down. Spare Tire and Jack Stowage ...

    See also:

    Filling washer fluid
    Location of the washer fluid reservoir The windshield and headlight washers share a common reservoir. The washer fluid reservoir is located on the driver's side of the engine compartment. Du ...

    Behavior with key lock-in prevention function non-operational
    ● If the lock lever is turned to the rear (“LOCK”) position with the driver’s door open and the driver’s door is then closed with the lock lever in that position, the driver’s door ...

    Installing front license plate
    Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the dril ...