Mercedes-Benz E-Class: MAX COOL maximum cooling
The MAX COOL function is only available in vehicles for the USA.
MAX COOL is only operational when the engine is running.
When you activate MAX COOL, climate control switches to the following functions:
- maximum cooling
- maximum airflow
- air-recirculation mode on
•► To activate: press the button.
The indicator lamp above the button lights up.
•► To deactivate: press the button again.
The indicator lamp goes out. The previously selected settings come into effect again.
Defrosting the windshield
You can use this function to defrost the windshield or to defrost the inside of the windshield and the side windows. You should only select the defrosting function until the windshield is clear ...Defrosting the windows
Windows fogged up on the inside •► Activate the cooling with air dehumidification function . •► Activate automatic mode . •► If the windows continue to fog up, activate ...See also:
Electronic Brake Force Distribution (EBD) system
The EBD system maximizes the effectiveness of the brakes by allowing the rear
brakes to supply a greater proportion of the braking force. It functions by adjusting
the distribution of braking forc ...
Maximum trailer loads
Never allow the total trailer load to exceed the
value specified in the “Towing
Load/Specification” chart found later in this section.
The total trailer load equals trailer weight
plus its car ...
Deactivating/activating ESP® (except
AMG vehicles)
WARNING
ESP® should not be deactivated during
normal driving other than in the
circumstances described below. Disabling
the system will reduce vehicle stability in
driving maneuvers.
Do ...