Nissan Maxima: Measurement of weights
Secure loose items to prevent weight shifts that could affect the balance of your vehicle. When the vehicle is loaded, drive to a scale and weigh the front and the rear wheels separately to determine axle loads. Individual axle loads should not exceed either of the gross axle weight ratings (GAWR). The total of the axle loads should not exceed the gross vehicle weight rating (GVWR). These ratings are given on the vehicle certification label. If weight ratings are exceeded, move or remove items to bring all weights below the ratings.
Loading tips
-The GVW must not exceed GVWR or GAWR as specified on the F.M.V.S.S./C.M.V.S.S.
certification label.
- Do not load the front and rear axle to the GAWR. Doing so will exceed the GVWR.
WARNING:
- P ...
Towing a trailer
WARNING:
Overloading or improper loading of a trailer and its cargo can adversely affect
vehicle handling, braking and performance and may lead to accidents.
CAUTION:
- Do not tow a trailer or ha ...
See also:
Most common factors contributing to vehicle
corrosion
● The accumulation of moisture-retaining dirt
and debris in body panel sections, cavities,
and other areas.
● Damage to paint and other protective coatings
caused by gravel and stone c ...
Sun visors
To block out glare, swing down the visors. To use the sun visor at a side window,
swing it down and move it sideways. ...
Vehicles with automatic transmission
•► Shift the transmission to position P.
Using the SmartKey
•► Turn the SmartKey to position 0 in the
ignition lock and remove it.
The immobilizer is activated.•► Apply ...
