Subaru Legacy: Moonroof (if equipped) - Rear gate (Outback) - Keys and doors - Subaru Legacy Owners ManualSubaru Legacy: Moonroof (if equipped)

WARNING

Never let anyone’s hands, arms, head or any objects protrude from the moonroof. A person could be seriously injured if the vehicle stops suddenly or turns sharply or if the vehicle is involved in an accident. To avoid serious personal injury caused by entrapment, you must conform to the following instructions without exception.

● Before closing the moonroof, make sure that no one’s hands, arms, head or other objects will be accidentally caught in the moonroof.

● Before leaving the vehicle, always remove the key from the ignition switch for safety and never allow an unattended child to remain in the vehicle. Failure to follow this procedure could result in injury to a child operating the moonroof.

● Never try to check the anti-entrapment function by deliberately placing part of your body in the moonroof.

CAUTION

● Do not sit on the edge of the open moonroof.
● Do not operate the moonroof if falling snow or extremely cold conditions have caused it to freeze shut.
● The anti-entrapment function does not operate when the moonroof is being tilted down. Be sure to confirm that it is safe to do so before tilting the moonroof down.

The moonroof has both tilting and sliding functions.

The moonroof operates only when the ignition switch is in the “ON” position.

    Rear gate (Outback)
    The rear gate can be locked and unlocked using any of the following systems. ● Power door locking switch: Refer to “Power door locking switches” F2-7. ● Remote keyless entry system ...

    See also:

    Programming the HomeLink®
    Point the remote control transmitter for the device 1 to 3 in. (25 to 75 mm) from the HomeLink® control buttons. Keep the HomeLink® indicator light in view while programming. Press and ...

    Locking doors
    1. Place the ignition switch in the LOCK position. 2. Close all doors. 3. Press the button on the Intelligent Key. 4. The hazard warning lights flash twice and the horn beeps once. 5. All d ...

    Cleaning the Seat Belts
    If your seat belts get dirty, use a soft brush with a mixture of mild soap and warm water to clean them. Do not use bleach, dye, or cleaning solvents. Let the belts air dry before you use ...