Subaru Legacy: Odometer - Meters and gauges - Instruments and controls - Subaru Legacy Owners ManualSubaru Legacy: Odometer

This meter displays the odometer when the ignition switch is in the “ON” position.

This meter displays the odometer when the ignition switch is in the “ON” position. The odometer shows the total distance that the vehicle has been driven.

If you press the trip knob when the ignition switch is in the “LOCK” or “Acc” position, the odometer/trip meter will light up. If you do not press the trip knob within 10 seconds of illumination of the odometer/ trip meter, the odometer/trip meter will turn off.

Also, if you open and close the driver’s door within 10 seconds of illumination of the odometer/trip meter, the odometer/trip meter will turn off.

    Speedometer
    The speedometer shows the vehicle speed. ...

    Double trip meter
    1) Trip knob This meter displays the two trip meters when the ignition switch is in the “ON” position. The trip meter shows the distance that the vehicle has been driven since you last set ...

    See also:

    Shifting to transmission position D
    •► When the vehicle is stationary, depress the brake pedal.•► Push the DIRECT SELECT lever down past the first point of resistance. ...

    Engine oil and oil filter recommendations
    Selecting the correct oil It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. See Capacities and recommended fuel/l ...

    Range
    The remote key has a range of approximately 60 ft. (20 m) from the vehicle. NOTE Buildings or other obstacles may interfere with the function of the remote key. The vehicle can also be locked ...