Subaru Legacy: Other markings
The following makings are also placed on the sidewall.
Maximum permissible inflation pressure
The maximum cold inflation pressure to which this tire may be inflated. For example, “350 kPa (51 PSI) MAX. PRESS”
Maximum load rating
The load rating at the maximum permissible weight load for this tire. For example, “MAX. LOAD 615 kg (1,356 LBS) @ 350 kPa (51 PSI) MAX. PRESS.”
WARNING
Maximum load rating applies only to the tire, not to the vehicle. Putting a load rated tire on any vehicle does not mean the vehicle can be loaded up to the tire’s rated load.
Construction type
Applicable construction of this tire. For example, “TUBELESS STEEL BELTED RADIAL”
Construction
The generic name of each cord material used in the plies (both sidewall and tread area) of this tire. For example, “PLIES: TREAD 2 STEEL + 2 POLYESTER + 1 NYLON SIDEWALL 2 POLYESTER”
Uniform Tire Quality Grading (UTQG)
For details, refer to “Uniform tire quality grading standards” F13-14.
Tire Identification Number (TIN)
Tire Identification Number (TIN) is marked on the intended outboard sidewall. The TIN is composed of four groups. Here is a brief review of the TIN with a breakdown of its individual elements. ...See also:
Breaking-in of new brake pads and linings
When replacing the brake pad or lining, use only genuine SUBARU parts. After
replacement, the new parts must be broken in as follows: ...
Introduction
Your vehicle is equipped with tires according to the vehicle's tire information
placard on the B-pillar (the structural member at the side of the vehicle, at the
rear of the driver's door ...
Radiator and condenser
Check the radiator and condenser and clear away any foreign
objects.
If either of the above parts is extremely dirty or you are not sure of
their condition, have your vehicle inspected by your To ...