Mercedes-Benz E-Class: Pedestrian recognition - Night View Assist Plus - Driving systems - Driving and parking - Mercedes-Benz E-Class Owners ManualMercedes-Benz E-Class: Pedestrian recognition

WARNING
Pedestrian recognition may be impaired or inoperative if:

 - pedestrians are partially or entirely obscured by objects, e.g. parked vehicles.

 - the silhouette of the pedestrian in the Night View Assist Plus display is incomplete or interrupted, e.g. by powerful light reflections.

 - pedestrians do not contrast with the surroundings.

 - pedestrians are not standing upright, for example, if they are sitting, crouching or lying down.

Animals are not recognized by pedestrian recognition.

Night View Assist Plus is able to recognize pedestrians by typical characteristics, e.g. a silhouette in the shape of a person.

Pedestrian recognition is then switched on automatically if:

 - Night View Assist Plus is activated.
 - you are driving faster than 6 mph (10 km/h).
 - the surroundings are dark, e.g. when driving outside built-up areas without street lighting.

If pedestrian recognition is active, symbol 4 appears. If pedestrians are recognized, they are framed 3 and thereby highlighted. If the pedestrian recognition system has brought a pedestrian to your attention, look through the windshield to evaluate the situation. The actual distance to objects and pedestrians cannot be gauged accurately by looking at a screen.

It may be the case that objects are highlighted as well as pedestrians.

    Switching on Night View Assist Plus
    Depending on your vehicle's date of manufacture, the or symbol for the "Automatic driving lights/daytime running lamps" position is located on the light switch. You can only ac ...

    Fogged up or dirty windshield
    If the windshield in front of the camera is fogged up or dirty on the inside or outside, the Night View Assist Plus display is affected. WARNING Please do not forget that your primary resp ...

    See also:

    Canada-spec. models
    1) Trip meter A/B selection and trip meter reset knob (page 3-6) 2) Tachometer (page 3-7) 3) Trip meter and odometer (page 3-6) 4) Speedometer (page 3-6) 5) Multi function display switching knob ...

    Security
    It is advised to erase all channels before you sell or turn in your vehicle. To do this, press and hold the two outside buttons for 20 seconds until the red indicator flashes. Note that all cha ...

    Resuming a Set Speed
    If the cruise control is set at a desired speed and then the brakes are applied or the is pressed, the cruise control is disengaged without erasing the set speed from memory. Once the vehicl ...