Honda Accord: Protecting Discs - Protecting Your Discs - Features - Honda Accord Owners ManualHonda Accord: Protecting Discs

When a disc is not being played, store it in its case to protect it from dust and other contamination. To prevent warpage, keep discs out of direct sunlight and extreme heat.

To clean a disc, use a clean soft cloth.

Wipe across the disc from the center to the outside edge.

A new disc may be rough on the inner and outer edges. The small plastic pieces causing this roughness can flake off and fall on the recording surface of the disc, causing skipping or other problems.

Remove these pieces by rubbing the inner and outer edges with the side of a pencil or pen.

Never try to insert foreign objects in the disc changer.

Handle a disc by its edges; never

Handle a disc by its edges; never touch either surface. Do not place stabilizer rings or labels on the disc.

These, along with contamination from finger prints, liquids, and felttip pens, can cause the disc to not play properly, or possibly jam in the drive.

    General Information
    When using CD-R or CD-RW discs, use only high quality discs labeled for audio use. When recording a CD-R or CD-RW, the recording must be closed for it to be used by the disc changer. Play ...

    Additional Information on Recommended Discs
    The in-dash disc player/changer has a sophisticated and delicate mechanism. If you insert a damaged disc as indicated in this section, it may become stuck inside and damage the audio unit. ...

    See also:

    Switching the display
    Press . Each time is pressed, the display changes in the following order: Frequency → Channel name → Radio text. ■Reception sensitivity ●Maintaining perfect radio recept ...

    Closing the fuel filler lid
    1. To install the cap, turn it clockwise until it “click”. This indicates that the cap is securely tightened. 2. Close the fuel filler lid and push it in lightly making sure that it is securely ...

    To open and close the hood
    To open the hood, two latches must be released. 1. Pull the hood release lever located under the left sideof the instrument panel. Hood Release Lever 2. Lift the secondary latch located under the ...