Subaru Legacy: RDS text display
If the PS (Program Service Name) and/or RT (Radio Text) are available, pressing the “TEXT” button changes the display among PS, RT and frequency. The initial setting is “PS”.
NOTE
● The maximum number of characters that can be displayed for PS is 8.
● The maximum number of characters that can be displayed for RT is 64.
● If RT is 16 characters or longer, press and hold the “TEXT” button for 0.5 second
or longer in order to change the page.
PTY (Program type) group tuning (only FM reception)
Press the “PTY/CAT” button to change to the PTY selection mode. At this time, the PTY group that you are currently listening to will be displayed for 10 seconds. In PTY selection mode, “PT ...Station preset
Preset buttons ...See also:
Maximum load limits
Maximum trailer loads
Never allow the total trailer load to exceed the value specified in the Towing
Load/Specification chart found later in this section.
The total trailer load equals trailer wei ...
Other markings
The following makings are also placed on the sidewall.
Maximum permissible inflation pressure
The maximum cold inflation pressure to which this tire may be inflated. For example,
“350 kPa (51 PS ...
Non-recommendation of the use of gasoline containing MMT
Some gasoline contains an octane enhancing additive called MMT
(Methylcyclopentadienyl
Manganese Tricarbonyl).
Toyota does not recommend the use of gasoline that contains MMT. If fuel
containin ...