Toyota Camry: Removing a child restraint installed with a seat belt
Push the buckle release button and fully retract the seat belt.
Installing child restraints using a seat belt (child restraint lock function
belt)
■ Rear facing ⎯ Infant seat/convertible seat
Place the child restraint system
on the rear seat facing the rear
of the vehicle.
Run the seat belt through the
child restraint sys ...
Child restraint systems with a top tether strap
Secure the child restraint using
the seat belt or LATCH anchors.
Open the anchor bracket cover,
latch the hook onto the anchor
bracket and tighten the top tether
strap.
Make sure the top ...
See also:
Compass calibration
1. If a “C” is displayed in the compass window, the compass needs to be calibrated.
2. Drive the vehicle in a circle at 5 mph (8 km/h) or less until the display reads
a direction.
3. You can a ...
Vehicle certification label
The vehicle certification label attached on the driver’s side center pillar contains
the vehicle identification number (VIN). ...
Automatic Transmission
The automatic transmission and differential assembly are
contained within a single housing.
The fluid level in the automatic transmission should be
checked whenever the vehicle is serviced. Opera ...
