Mercedes-Benz E-Class: Shifting to transmission position D - DIRECT SELECT lever - Automatic transmission - Driving and parking - Mercedes-Benz E-Class Owners ManualMercedes-Benz E-Class: Shifting to transmission position D

•► When the vehicle is stationary, depress the brake pedal.
•► Push the DIRECT SELECT lever down past the first point of resistance.

    Shifting to neutral N
    •► When the vehicle is stationary, depress the brake pedal. •► Push the DIRECT SELECT lever up or down to the first point of resistance. If the engine has been switched off, the ...

    Transmission positions
    Park position Do not shift the transmission into position P unless the vehicle is stationary. The parking lock should not be used as a brake when parking. In addition to engaging the pa ...

    See also:

    Automatic mode
    The automatic engine start/stop function is operational after each engine start. The function is activated above a certain speed. ▷ Manual transmission: above 3 mph, approx. 5 km/h. ▷ ...

    Engine compartment fuse replacement
    1. Turn the ignition switch and all other switches off. 2. Remove the fuse panel cover by pressing the tab and pulling up. 3. Check the removed fuse; replace it if it is blown. To remove or insert ...

    Roadside Assistance button
    •► Press and hold Roadside Assistance button 1 for more than two seconds. This initiates a call to the Mercedes-Benz Customer Assistance Center. The indicator lamp in Roadside Assista ...