Subaru Legacy: Vehicle load limit – how to determine - Tire information - Consumer information and Reporting safety defects - Subaru Legacy Owners ManualSubaru Legacy: Vehicle load limit – how to determine

The load capacity of your vehicle is determined by weight, not by available cargo space. The load limit of your vehicle is shown on the vehicle placard attached to the driver’s side B-pillar. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard.

The vehicle placard also shows seating capacity of your vehicle. The total load capacity includes the total weight of driver and all passengers and their belongings, any cargo, any optional equipment such as a trailer hitch, roof rack or bike carrier, etc., and the tongue load of a trailer. Therefore cargo capacity can be calculated by the following method.

Cargo capacity = Load limit − (total weight of occupants + total weight of optional equipment + tongue load of a trailer (if applicable))

For towing capacity information and weight limits, refer to “Trailer towing” F8-19.

Tire care – maintenance and safety practices
● Check on a daily basis that the tires are free from serious damage, nails, and stones. At the same time, check the tires for abnormal wear. ● Inspect the tire tread regularly and repl ...

Calculating total and load capacities varying seating configurations
Calculate the available load capacity as shown in the following examples: Example 1A Vehicle capacity weight of the vehicle is 800 lbs (363 kg), which is indicated on the vehicle placard with th ...

See also:

Monitor, climate, audio, phone and voice recognition systems
WARNING ● Positioning of the heating or air conditioning controls and display controls should not be done while driving in order that full attention may be given to the driving operation. ...

Hazardous driving conditions
When hazardous driving conditions are encountered such as water, snow, ice, mud, sand, or similar hazards, follow these suggestions: • Drive cautiously and allow extra distance for braking. ...

Securing a Child Restraint Designed for the LATCH System
WARNING If a LATCH-type child restraint is not attached to anchors, the child restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed. ...