Subaru Legacy: Vehicle placard - Recommended tire inflation pressure - Tire information - Consumer information and Reporting safety defects - Subaru Legacy Owners ManualSubaru Legacy: Vehicle placard

The vehicle placard is affixed to the driver’s side B-pillar.

The vehicle placard is affixed to the driver’s side B-pillar.

Example:

The vehicle placard shows original tire size, recommended cold tire inflation

The vehicle placard shows original tire size, recommended cold tire inflation pressure on each tire at maximum loaded vehicle weight, seating capacity and loading information.

    Recommended cold tire inflation pressure
    For the recommended cold tire inflation pressure for your vehicle’s tires, refer to “Tires” F12-8. ...

    Adverse safety consequences of under-inflation
    Driving at high speeds with excessively low tire pressures can cause the tires to flex severely and to rapidly become hot. A sharp increase in temperature could cause tread separation, and failure ...

    See also:

    Power Windows
    Power Windows Press the switch to lower the window. Pull the switch up to raise it. The switches work when the ignition is in ON/RUN or ACC/ACCESSORY, or in Retained Accessory Power (RAP). ...

    Larger children
    Children who are too large for child restraints should be seated and restrained by the seat belts which are provided. The seat belt may not fit properly if the child is less than 4 ft 9 in (142.5 ...

    Push-button ignition switch positions
    LOCK (Normal parking position): The ignition switch can only be locked in this position. The ignition switch will be unlocked when it is pushed to the ACC position while carrying the Intelligent ...