Hyundai Sonata: Digital clock (if equipped) - Interior features - Features of your vehicle - Hyundai Sonata Owners ManualHyundai Sonata: Digital clock (if equipped)

WARNING

WARNING

Do not adjust the clock while driving. You may lose your steering control and cause an accident that results in severe personal injury or death.

Whenever the battery terminals or related fuses are disconnected, you must reset the time.

When the ignition switch is in the ACC or ON position, the clock buttons operate as follows:

Hour (1)

Pressing the H button with your finger, a pencil or similar object will advance the time displayed by one hour.

Minute (2)

Pressing the M button with your finger, a pencil or similar object will advance the time displayed by one minute.

Display conversion

To change the 12 hour format to the 24 hour format, press the “H” and “M” buttons at the same time for more than 3 seconds.

For example, if the “H” and “M” buttons are pressed for more than 3 seconds while the time is 10:15 p.m., the display will be changed to 22:15.

    Power outlet
    The power outlet is designed to provide power for mobile telephones or other devices designed to operate with vehicle electrical systems. The devices should draw less than 10 amps with the engin ...

    Clothes hanger (if equipped)
    To use the hanger, pull down the upper portion of hanger. CAUTION Do not hang heavy clothes, because it may damage the hook. ...

    See also:

    Software Update
    The vehicle supports various external devices depending on the current software version. With a software update, the vehicle can support new cell phones or new external devices. The updating of ...

    Air cleaner element
    WARNING Do not operate the engine with the air cleaner element removed. The air cleaner element not only filters intake air but also stops flames if the engine backfires. If the air cleaner eleme ...

    Drive belt
    1. Power steering fluid pump. 2. Generator. 3. Air conditioner compressor. 4. Crankshaft pulley. WARNING: Be sure the ignition switch is in the OFF or LOCK position before servicing drive bel ...