Mercedes-Benz E-Class: Folding out the folding bench seat
•► Make sure that the backrests of the rear bench seat are locked in the upright position.
•► Move the handle for the combined cargo cover and net upwards.
•► Pull release handle 1 and fold the backrest of the folding bench seat upwards.
•► Hook the seat belts into retainers 3.
•► Pull release handle 2 and fold the folding bench seat cushion into the sitting position.
•► Push down the seat cushion until the backrest engages fully.
•► Fold the head restraints upwards.
Important safety notes
The folding bench seat in the cargo
compartment is only approved for people
with a height no greater than 4.6 ft(1.40 m)
and max. 110 lb(50 kg) body weight.
The maximum permissible weight avail ...
installing and removing the seat
cushion
You must remove the seat cushion if you wish
to lift the trunk floor, e.g. if the vehicle has a
flat tire.
•► To remove: fold seat cushion 2 upwards
and remove it from seat cushion
...
See also:
High/low beam change (dimmer)
To change from low beam to high beam, push the turn signal lever forward. When
the headlights are on high beam, the high beam indicator light “”
on the combination meter is also on.
To swit ...
How to Wear Safety Belts Properly
This section is only for people of adult size.
Be aware that there are special things to know about safety belts and children. And there are different rules for smaller children and infants. If a chi ...
Battery replacement
CAUTION:
Be careful not to allow children to swallow the battery or removed parts.
...
