Subaru Legacy: <span lang=Electronic parking brake system warning - Brake system warning light - Warning and indicator lights - Instruments and controls - Subaru Legacy Owners Manual" border="0" width="100" align=right style="margin: 0px 3px 0 3px">Subaru Legacy: Electronic parking brake system warning

The brake system warning light flashes when the electronic parking brake system is malfunctioning. If the warning light flashes, promptly park in a safe location as soon as possible and contact your SUBARU dealer.

The brake system warning light remains illuminated when the parking brake cannot be released even if the parking brake switch is pulled. For details, refer to “Electronic parking brake” F7-34.

Parking brake apply inhibit warning

The brake system warning light flashes for 10 seconds and a chirp sound will be heard if the parking brake switch is operated when the parking brake cannot be applied.

Frequent operation warning

The brake system warning light flashes for 20 seconds and a chirp sound will be heard if the parking brake switch is operated too frequently. In this case, the operation of the parking brake switch is restricted to protect the electronic parking brake system.

NOTE

Wait until the warning light turns off. ! Emergency released warning The brake system warning light flashes when the parking brake is automatically released in case of an emergency.

    Electronic Brake Force Distribution (EBD) system warning
    The brake system warning light also illuminates if a malfunction occurs in the EBD system. In that event, it illuminates together with the ABS warning light. The EBD system may be malfunctioning i ...

    Hill Holder indicator light
    WARNING If the Hill Holder indicator light does not illuminate even when the Hill Holder switch is pressed to activate the Hill Holder function, the electronic parking brake system may be malfu ...

    See also:

    Main view
    Example of RADIO mode's main view 1 - Modes (e.g., RADIO, MEDIA etc.), see the following table. 2 - Source menu, e.g., (FM1, DISC, etc.). Press and hold EXIT on the steering wheel keypad to d ...

    Remote transmitter program
    New transmitters can be programmed to the remote engine start system in the event that a transmitter is lost, stolen, damaged or additional transmitters are desired (the system will accept up to e ...

    Opening
    •► Switch off the engine. •► Remove the SmartKey from the ignition lock. KEYLESS-GO: open the driver’s door. This switches the ignition to position 0, which corresponds to ha ...