Subaru Legacy: A/C – Air conditioner button
If the windshield starts to fog when the climate control system is operated in the AUTO mode, press the air conditioner button “A/C” to defog and dehumidify. When this button is pressed, the air conditioner compressor turns on and the indicator light “A/C” on the display illuminates.
To turn off the air conditioner compressor, press the “A/C” button again.
NOTE
The air conditioner compressor does not operate when the outside air temperature is below 328F (08C).
Fan speed control button
The fan speed control button has 6 different fan speed positions. The fan speed
is shown by the display. ...
Airflow mode selection button
Select the desired airflow mode by pressing the airflow mode selection button.
The selected airflow mode is shown on the display.
There are four airflow modes that activate the following air outl ...
See also:
Locking and unlocking
Locking and unlocking
Pressing the buttons locks and unlocks the
doors and the trunk lid when the front doors are
closed, but they are not secured against theft.
The fuel filler flap remains u ...
Precautions on cruise control
-If the cruise control system malfunctions, it cancels automatically.
WARNING:
Do not use the cruise control when driving under the following conditions:
- When it is not possible to keep the vehic ...
Manual climate control system
To defog inside windshield
1. Select any fan speed except “0” position.
2. Select desired temperature.
3. Select the or
position.
4. The outside (fresh) air will be selected automatically ...
