Volvo S60: Activating/deactivating warning signals
The collision warning system’s visual signals are activated automatically when the engine is started if the collision warning system is switched on.
The audible warning signal can be activated/ deactivated by pressing MY CAR on the center console control panel and going to Settings Car settings Driver support systems Warning sound if risk of collision.
On and off
To switch Collision Warning on or off, press MY CAR on the center console control
panel and go to Settings Car settings Driver support systems Collision Warning.
If Collision Warning is on, the sy ...
Setting a warning distance
This setting determines the distance at which the visual and audible warnings
are triggered. Select Long, Normal or Short by pressing MY CAR on the center console
control panel and going to Settin ...
See also:
Tire Rotation
To help increase tire life and
distribute wear more evenly, rotate
the tires according to the
maintenance messages displayed on
the information display.
Move the tires to the positions
sh ...
Speed-dependent steering force*
Steering force increases with the speed of the vehicle to give the driver enhanced
sensitivity. At low speed the vehicle is easy to steer in order to facilitate parking,
etc.
Steering force can b ...
Engine (ignition) switch (vehicles with a smart key system)
Performing the following operations when carrying the electronic
key on your person starts the engine or changes “ENGINE START
STOP” switch modes. ...
