Mercedes-Benz E-Class: Activating the HOLD function
•► Make sure that the activation conditions are met.
•► Depress the brake pedal.
•► Quickly depress the brake pedal further until HOLD display 1 appears in the multifunction display.
The HOLD function is activated. You can release the brake pedal.
If depressing the brake pedal the first time does not activate the HOLD function, wait briefly and then try again.
WARNING
The vehicle's brakes are applied when the
HOLD function is activated. For this reason,
deactivate the HOLD function if the vehicle is
to be set in motion by other means (e.g. in a
car wash or by towing).
Activation conditions
You can activate the HOLD function if:
- the vehicle is stationary.
- the engine is running.
- the driver's door is closed or your seat belt
is fastened.
- the p ...
Deactivating the HOLD function
The HOLD function is deactivated
automatically if:
- you accelerate and the transmission is in
position D or R.
- you shift the transmission to position P.
- you apply t ...
See also:
Radar sensor
Position
Radar sensor
Dirty or covered sensor
A dirty or covered sensor may hinder the detection
of vehicles.
▷ If necessary, clean the radar sensor. Remove
layers of snow and ice care ...
PRE-SAFE® Brake
PRE-SAFE® Brake is only available in vehicles
with DISTRONIC PLUS.
Observe the "Important safety notes"
section
PRE-SAFE® Brake can help you to minimize
the risk of a frontal colli ...
Automatic Soft Closing
To close the doors, push lightly.
It is closed automatically.
Danger of pinching<>
Make sure that the closing path of the
doors is clear; otherwise, injuries may result.◀ ...
