Volvo S60: Active Bending Lights (ABL)*

Volvo S60 / Volvo S60 Owners Manual / Your driving environment / Lighting / High/low beam headlights / Active Bending Lights (ABL)*

Headlight pattern with the Active Bending Light function deactivated

Headlight pattern with the Active Bending Light function deactivated (left) and activated (right)

When this function is activated, the headlight beams adjust laterally to help light up a curve according to movements of the steering wheel (see the right-pointing beam in the illustration).

ABL is activated automatically1 when the engine is started.

The function can be deactivated/reactivated in the MY CAR menu system under My S60 Active Bending Lights or under Settings Car settings Light settings Active Bending Lights.

See page 133 for a description of the menu system.

NOTE

This function is only active in twilight or dark conditions, and only when the vehicle is in motion.

If a fault should occur in the system, the symbol will illuminate and a message will be displayed as shown in the table.

Parking lights

High/low beam headlights

Continuous high beams 1. Set the ignition to mode II. 2. With the light switch in position 0 or , pull the turn signal lever toward the steering wheel to position 2 to toggle between high and low ...

Parking lights

Headlight control in position for parking lights The parking lights (the license plate lights also come on) can be turned on even when the ignition is switched off. Turn the headlight control to ...