Honda Accord: Adjusting the Power Mirrors - Mirrors - Instruments and Controls - Honda Accord Owners ManualHonda Accord: Adjusting the Power Mirrors

1. Turn the ignition switch to the ON

1. Turn the ignition switch to the ON (II) position.

2. Move the selector switch to L (driver’s side) or R (passenger’s side).

3. Push the appropriate edge of the adjustment switch to move the mirror right, left, up, or down.

4. When you finish, move the selector switch to the center (off) position. This turns the adjustment switch off to keep your settings.

    Mirrors
    Keep the inside and outside mirrors clean and adjusted for best visibility. Be sure to adjust the mirrors before you start driving. The inside mirror has day and night positions. The night p ...

    Power Mirror Heaters
    All Canadian models U.S. EX, EX-L and all V6 models The outside mirrors are heated to remove fog and frost. With the ignition switch in the ON (II) position, turn on the heaters by pressi ...

    See also:

    Highway driving
    Tires Adjust the tire inflation pressures to specification. Low tire inflation pressures will result in overheating and possible failure of the tires. Avoid using worn or damaged tires which may ...

    Starting navigation system
    1. Press the button on the controller. 2. "Navigation" The navigation system can also be accessed directly with the button on the controller. ...

    Ignition Transmission Lock Check
    While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position. • The ignition should turn to LOCK/OFF only when the shift lever is in P ( ...