Subaru Legacy: AT OIL TEMP warning light (AT and CVT models)
The AT oil temperature warning light “AT OIL TEMP” illuminates when the ignition switch is turned to the “ON” position and turns off after approximately 2 seconds. If this light illuminates when the engine is running, it may indicate that the transmission fluid temperature is too hot. If the light illuminates while driving, immediately stop the vehicle in a safe place and let the engine idle until the warning light turns off.
Engine low oil level warning light
The engine low oil level warning light illuminates when the ignition switch is
turned to the “ON” position and turns off after approximately 2 seconds.
This light also illuminates when the en ...
Transmission control system warning
If the “AT OIL TEMP” warning light flashes after the engine has started, it may
indicate that the transmission control system is not working properly. Contact your
nearest SUBARU dealer for se ...
See also:
Brake booster
If the brake booster does not operate as described in the following procedure,
have it checked by your SUBARU dealer.
1. With the engine off, depress the brake pedal several times, applying the sam ...
Exit Lighting
This allows selection of how long
the exterior lamps stay on when
leaving the vehicle and it is dark
outside.
Press SELECT when Exit Lighting is
highlighted. Turn the Menu knob to
select Of ...
Regulatory Information
FCC Regulatory information
– CAUTION: To maintain compliance with
FCC’s RF exposure guidelines, use only the
supplied antenna. Unauthorized antenna,
modification, or attachments could damage
...
