Nissan Altima: Auto-reverse function
If the control unit detects something caught in the window as it is closing, the window will be immediately lowered.
The auto-reverse function can be activated when the window is closed by automatic operation when the ignition switch is placed in the ON position or for 45 seconds after the ignition switch is placed in the OFF position. Depending on the environment or driving conditions, the auto-reverse function may be activated if an impact or load similar to something being caught in the window occurs.
WARNING
There are some small distances immediately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the window.
Automatic operation
To fully open a window equipped with automatic operation, press the window switch down (only driver’s side shown) to the second detent and release it; it need not be held. The window automatica ...Moonroof
When power window switch does not operate If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system: ...See also:
Automatic Temperature Control (ATC) — If Equipped
Automatic Temperature Control ...
Deleting old transmitter codes
The control unit of the remote keyless entry system has four memory locations
to store transmitter codes, giving it the ability to operate with up to four transmitters.
When you lose a transmitter ...
Type B inside mirror (if equipped)
1) Electronic compass display
2) Rear view image display
3) HomeLink® button 1
4) HomeLink® button 2
5) Function indicator
6) HomeLink® button 3
7) Photosensor
8) Power button
9) Compass ...