Using the Auto-store function, you can automatically store 6 stations on the current waveband by pressing the “A.S” button for more than 2 seconds. Use Autostore to quickly find the strongest stations, for example when traveling through different reception areas.

NOTE

● When you use Auto-store, the new stations replace any stations previously stored.

● Interrupting Auto-store: If you accidentally press the “A.S” (Auto-store) button, you can cancel the Auto-store function before it has been completed as follows.

– Switching to the other source
– Switching to the other band
– Press the “A.S” button
– Press the “SCAN” button
– Press the “SEEK” button
– Press any of the preset buttons
– Turn the “TUNE/TRACK/CH” dial
– Turn off the audio system
– Turn off the ignition switch

● When you use the Auto-store function while selecting the FM mode, even if you have selected the FM1 or FM2 station, the new stations are stored in the FM3 station.

● If it is only possible to receive less than 6 stations, the available stations are stored from preset 1 in order by frequency and the unused preset buttons are not registered to a station.

Also, the previously registered station memories of the unused preset buttons are cleared.

● If no stations can be received, the previously stored stations are not replaced.

● After pressing the “A.S” button, if more than 1 station is stored, the radio receives the station stored in preset 1.

● After pressing the “A.S” button, if no stations are stored, the radio receives the band and station that the radio received before pressing the button.