Chrysler 200: Auto Unlock On Exit Programming
The Automatic Unlock Doors On Exit feature can be enabled or disabled as follows:
• For vehicles equipped with the Electronic Vehicle Information Center (EVIC), refer to “Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)” in “Understanding Your Instrument Panel” for further information.
• For vehicles not equipped with the EVIC, perform the following procedure:
1. Close all doors and place the key in the ignition.
2. Cycle the ignition switch between LOCK and ON/ RUN and then back to LOCK four times, ending up in the LOCK position.
3. Press the power door unlock switch to unlock the doors.
4. A single chime will indicate the completion of the programming.
5. Repeat these steps if you want to return this feature to its previous setting.
NOTE:
Use the Automatic Unlock Doors On Exit feature
in accordance with local laws.
Auto Unlock On Exit
The doors will unlock automatically on vehicles with power door locks if: 1. The Automatic Unlock Doors On Exit feature is enabled. 2. The transmission was in gear and the vehicle speed returned ...Child-Protection Door Lock System — Rear Doors
To provide a safer environment for children riding in the rear seat, the rear doors of your vehicle have a Child- Protection Door Lock system. Child-Protection Door Lock Location The Child-Pro ...See also:
Change of address or change of
ownership
In the event of a change of address, please
send us the "Change of Address Notice"
found in the Service and Warranty
Information Booklet, or simply call the
Mercedes-Benz Customer As ...
Principle of operation
The engine immobiliser is a theftprotection system that prevents someonefrom starting the engine with anincorrectly coded key. ...
Tires and wheels
16-inch tires
17-inch tires
18-inch tires
...