Nissan Altima: Autolight system (if so equipped) - Headlight control switch - Headlight and turn signal switch - Instruments and controls - Nissan Altima Owners ManualNissan Altima: Autolight system (if so equipped)

The autolight system allows the headlights to be

The autolight system allows the headlights to be set so they turn on and off automatically. The autolight system can:

● Turn on the headlights, front parking, tail, license plate and instrument panel lights automatically when it is dark.

● Turn off all the lights when it is light.

● Keep all the lights on for 45 seconds after you place the ignition switch in the OFF position and all doors are closed.

To turn on the autolight system:

1. Turn the headlight switch to the AUTO position 1 .

2. Push the push-button ignition switch to the ON position.

3. The autolight system automatically turns the headlights on and off.

Initially, if the ignition switch is placed in the OFF position and a door is opened and left open, the headlights remain ON for 5 minutes. If another door is opened during the 5 minutes, then the 5 minute timer is reset.

To turn the autolight system off, turn the switch to the OFF or position. , or position.

Be sure you do not put anything on top of

Be sure you do not put anything on top of the autolight sensor located on the top side of the instrument panel. The autolight sensor controls the autolight; if it is covered, the autolight sensor reacts as if it is dark out and the headlights will illuminate. If this occurs while parked with the engine off and the ignition switch placed in the ON position, your vehicle’s battery could become discharged.

    Lighting
    1 When turning the switch to the position, the front parking, tail, license plate and instrument panel lights come on. 2 When turning the switch to the position, the headlights come on and ...

    Headlight beam select
    1 To select the high beam function, push the lever forward. The high beam lights come on and the light illuminates. 2 Pull the lever back to select the low beam. 3 Pulling and releasing the lev ...

    See also:

    Services
    Subscribers have the following Safety Connect services available: ● Automatic Collision Notification* Helps drivers receive necessary response from emergency service providers. *: U.S. Pate ...

    Compass Display
    The compass heading indicates the direction the vehicle is facing. Press and release the compass button to display one of eight compass headings, the outside temperature, and audio informati ...

    Immobilizer
    See Radio Frequency Statement  for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-210/220/310. ...