Nissan Maxima: Automatic anti-glare rearview mirror
The inside mirror is designed so that it automatically dims during night time conditions and according to the intensity of the headlights of the vehicle following you. The automatic anti-glare feature is activated when the ignition switch is placed in the ON position.
Do not hang any objects over the sensors (1) or apply glass cleaner to the sensors.
Doing so will reduce the sensitivity of the sensors, resulting in improper operation.
Type A
Type A
The indicator light (2)- will illuminate when the automatic anti-glare feature is operating.
With the ignition switch placed in the ON position, press the button as described:
- To turn off the anti-glare feature, press the button. The indicator light will turn off.
- To turn on the anti-glare feature, press the button again. The indicator light will turn on.
For information on the compass display (if so equipped), see Compass display in the Instruments and controls section of this manual.
Type B-Without compass
Type B and Type C
The indicator light (2)- will illuminate when the automatic anti-glare feature is operating.
To turn off the automatic anti-glare feature, press:
- the button for inside mirrors without compass.
- the button for inside mirrors with compass.
The indicator light will turn off.
Type C-With compass
To turn on the automatic anti-glare feature again, press:
- the button for inside mirrors without compass.
- the button for inside mirrors with compass.
The indicator light will turn on.
Some vehicles are also equipped with automatic anti-glare outside mirrors. For additional information, see Automatic anti-glare outside mirrors in this section.
For information on HomeLink Universal Transceiver operation, see the HomeLink Universal Transceiver in the Instruments and controls section of this manual.
For information on the compass display (if so equipped), see Compass display in the Instruments and controls section of this manual.
Vanity mirrors
To access the vanity mirror, pull the sun visor down and flip open the mirror cover. The vanity mirror will illuminate when the mirror cover is open. ...Outside mirrors
The outside mirror remote control will operate only when the ignition switch is in the ACC or ON position. Move the small switch (1) to select the right or left mirror. Adjust each mirror to th ...See also:
Safety Belt Pretensioners
This vehicle has safety belt
pretensioners for front outboard
occupants. Although the safety belt
pretensioners cannot be seen, they
are part of the safety belt assembly.
They can help tighte ...
StabiliTrak® OFF Light
This light comes on when the StabiliTraK system is turned off.
If the Traction Control System (TCS) is off, wheel spin is not limited.
If StabiliTrak is off, the system does not assist in controll ...
Hazard warning flasher
The hazard warning flasher should be used whenever you find it necessary to stop
the car in a hazardous location. When you must make such an emergency stop, always
pull off the road as far as po ...