BMW 5 Series: Avoiding unintentional alarms
The tilt alarm sensor and interior motion sensor can be switched off together, such as in the following situations:
▷ In automatic car washes.
▷ In duplex garages.
▷ During transport on car-carrying trains, at
sea or on a trailer.
▷ When animals are to remain in the vehicle.
Switching off the tilt alarm sensor and interior motion sensor
Press the remote control button
again
within 10 seconds as soon as the vehicle
is locked.
The indicator lamp lights up for approx. 2 seconds and then continues to flash.
The tilt alarm sensor and interior motion sensor are switched off until the vehicle is locked again.
Interior motion sensor
The windows and glass sunroof must be closed
for the system to function properly ...
Power windows
...
See also:
Removing a headlamp
1. Open the bonnet. See Opening andclosing the bonnet.
2. Remove the screws.
CAUTION:
Do not pull the bumper more than 10mm from its original position.
3. Carefully pull the bumper towards the ...
Reassigning individual programs
1. Switch on the ignition.
2. Hold the hand-held transmitter a distance of
approx. 1 to 3 in/2.5 to 8 cm from the memory
buttons.
The required distance depends on the
manual transmitter.
3. H ...
Left control panel
- Calls up the menu and menu bar
Press briefly:
- Scrolls through lists
- Selects a submenu or function
- In the Audio menu: selects a
stored station, an audio track or ...