Mercedes-Benz E-Class: Braking
If ABS intervenes when braking, you will feel a pulsing in the brake pedal.
•► If ABS intervenes: continue to depress the brake pedal with force until the braking situation is over.
•► To make a full brake application: depress the brake pedal with full force.
The pulsating brake pedal can be an indication of hazardous road conditions, and functions as a reminder to take extra care while driving.
WARNING
Do not pump the brake pedal. Use firm, steady
brake pedal pressure instead. Pumping the
brake pedal defeats the purpose of the ABS
and significantly reduces braking
effectiveness.
Important safety notes
Observe the "Important safety notes"
section
ABS regulates brake pressure in such a way
that the wheels do not lock when you brake.
This allows you to continue steering the
vehicle w ...
BAS (Brake Assist System)
Observe the "Important safety notes"
section
BAS operates in emergency braking
situations. If you depress the brake pedal
quickly, BAS automatically boosts the braking
force, thus s ...
See also:
Closing Sunroof — Manual Mode
To close the sunroof, press and hold the switch in the
forward position. Any release of the switch will stop the
movement and the sunroof will remain in a partially
closed condition until the sw ...
Safety precautions
WARNING
● For safety reasons, avoid operating of the cell phone while driving.
● Do not make a phone call while driving. When you have an incoming call, stop the
vehicle in a safe loca ...
Replacing fuses
There are relay/fuse boxes located in the engine compartment, the passenger compartment,
and the trunk.
If an electrical component fails to function, this may be due to a blown fuse.
The easiest ...
