BMW 5 Series: Brightness
Setting the brightness
To set the brightness of the Control Display:
1. "Settings"
2. "Control display"
3. "Brightness"
4. Turn the controller until the desired brightness
is set.
5. Press the controller.
The setting is stored for the remote control currently in use.
Depending on the light conditions, the brightness control may not be clearly visible.
Units of measure
Setting the units of measure To set the units for fuel consumption, route/distance and temperature: 1. "Settings" 2. "Language/Units" 3. Select the desired menu item. 4. S ...Lamps
...See also:
Tire Labeling
The tires that came on your vehicle
have a number of markings. Those
you should be aware of are described
below.
Tire Size
Whenever tires are replaced, they
should be replaced with tires o ...
Vehicle data
For the specified vehicle data, please note
that:
The heights specified may vary due to:
- tires
- load
- condition of the suspension
- optional equipment
Missing values were not avai ...
Heater operation
Heating
This mode is used to direct heated air to the foot
outlets. Some air also flows from the defrost
outlets and the side vent outlets.
1. Press the button to the OFF
position
for normal h ...