Buick Regal: Certification Label - Vehicle Load Limits - Driving Information - Driving and Operating - Buick Regal Owners ManualBuick Regal: Certification Label

A vehicle-specific Certification label is attached to the driver side center pillar (B-pillar). Label Example

A vehicle-specific Certification label is attached to the driver side center pillar (B-pillar).

The label tells the gross weight capacity of the vehicle, called the Gross Vehicle Weight Rating (GVWR). The GVWR includes the weight of the vehicle, all occupants, fuel, and cargo.

Never exceed the GVWR for the vehicle, or the Gross Axle Weight Rating (GAWR) for either the front or rear axle.

And, if there is a heavy load, it should be spread out.

See “Steps for Determining Correct Load Limit” earlier in this section.

Do not load the vehicle any heavier than the Gross Vehicle Weight Rating (GVWR), or either the maximum front or rear Gross Axle Weight Rating (GAWR). WARNING
Do not load the vehicle any heavier than the Gross Vehicle Weight Rating (GVWR), or either the maximum front or rear Gross Axle Weight Rating (GAWR).

This can cause systems to break and change the way the vehicle handles. This could cause loss of control and a crash. Overloading can also shorten the life of the vehicle.

If you put things inside the vehicle—like suitcases, tools, packages, or anything else—they will go as fast as the vehicle goes. If you have to stop or turn quickly, or if there is a crash, they will keep going.

Things inside the vehicle can strike and injure people in a sudden stop or turn, or in a crash. WARNING
Things inside the vehicle can strike and injure people in a sudden stop or turn, or in a crash.

► Put things in the cargo area of the vehicle. In the cargo area, put them as far forward as possible.

Try to spread the weight evenly.

Never stack heavier things, like suitcases, inside the vehicle so that some of them are above the tops of the seats.

► Do not leave an unsecured child restraint in the vehicle.

► Secure loose items in the vehicle.

► Do not leave a seat folded down unless needed.

    Steps for Determining Correct Load Limit
    1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle's placard. 2. Determine the combined weight of the driver and passengers ...

    See also:

    Crash event data
    This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road ...

    Turning a Function On or Off
    1. Turn the Menu knob to highlight the function. 2. Press SELECT to turn the function on or off. ...

    Beverage Holders
    Be careful when you are using the beverage holders. A spilled liquid that is very hot can scald you or your passengers. Spilled liquids can damage the upholstery, carpeting, and electrical c ...