Toyota Camry: Changing the odometer/trip meter display
Pressing the button changes the display as follows.
Type A
● Odometer
Displays the total distance the vehicle has been driven.
● Trip meters A and B
Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently.
Press and hold the button to reset.
● Outside temperature
Displays the outside air temperature.
The temperature range that can be displayed is from -40°F (-40°C) to 122°F (50°C).
● Average fuel consumption
Displays the average fuel consumption since the function was last reset.
• To reset the function, press and hold the button while average fuel consumption is being displayed.
The average fuel consumption meter will also be reset, returning the needle to the 0 position.
• Use the displayed average fuel consumption as a reference.
● Current fuel consumption
Displays the current rate of fuel consumption
Type B
● Odometer
Displays the total distance the vehicle has been driven.
● Trip meters A and B
Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently.
Press and hold the button to reset.
● Average fuel consumption
Displays the average fuel consumption since the function was last reset.
• To reset the function, press and hold the button while average fuel consumption is being displayed.
The average fuel consumption meter will also be reset, returning the needle to the 0 position.
• Use the displayed average fuel consumption as a reference.
Gauges and meters
Type A
1 Tachometer
Displays the engine speed in revolutions per minute.
2 Speedometer
Displays the vehicle speed.
3 Fuel gauge
Displays the quantity of fuel remaining in the tank.
4 Average ...
Instrument panel light control button
The brightness of the instrument panel lights can be adjusted.
Type A
Pressing the button will adjust
brightness of the instrument
panel lights.
Type B
Pressing the button will adjust
br ...
See also:
Vehicle and Power Issues
OnStar services require a vehicle
electrical system, wireless service,
and GPS satellite technologies to be
available and operating for features
to function properly. These systems
may not o ...
Standby mode due to action by the driver
ACC is temporarily deactivated and put in standby mode:
when the brakes are applied
if the driver's seat belt is taken off
If the driver's door is opened
if the gear selector is move ...
Tire specification and pressure label
Tire specification
and pressure label
The tires supplied on your new vehicle are chosen to provide the best performance
for normal driving.
The tire label located on the driver's sid ...
