Ford Fusion: Changing the remote control battery
Make sure that you dispose ofold batteries in anenvironmentally friendly way.
Seek advice from your local authorityregarding recycling.
If the range of the transmitter in the keydecreases gradually, the battery (type 3VCR 2032) should be replaced.
• Carefully separate the transmitter unitfrom the key using a flat object (e.g. ascrewdriver) at the recess on theback.
• Carefully prise out the battery with theflat object. Fit the new batterybetween the contacts with the + signfacing downwards. Reassemble thetransmitter unit in reverse order.
• Open the transmitter unit byseparating the retaining clips on thesides with the flat object.
• Carefully prise out the battery with theflat object. Fit the new batterybetween the contacts with the + signfacing downwards. Reassemble thetransmitter unit in reverse order.
Programming the remote control
A maximum of four remote controls(including the ones supplied with thevehicle) can be programmed. To programme a new remote control: • Turn the ignition key to position II fourtimes within six s ...Locks
...See also:
Power Mirrors
The power mirror controls are located on the driver’s
door trim panel.
Power Mirror Switch
To adjust a mirror, turn the control wand toward the left
or right mirror positions indicated. Tilt ...
The concept
The vehicle can be accessed without activating
the remote control.
All you need to do is to have the remote control
with you, e.g., in your jacket pocket.
The vehicle automatically detects the r ...
Monitor, climate, audio, phone and voice recognition systems
WARNING
● Positioning of the heating or air conditioning
controls and display controls
should not be done while driving in order
that full attention may be given to
the driving operation.
...