Subaru Legacy: Check the fluid level monthly.
1. Drive the vehicle several miles to raise the temperature of the transmission fluid up to normal operating temperature; 158 to 1768F (70 to 808C) is normal.
2. Park the vehicle on a level surface and set the parking brake.
3. First shift the select lever in each position. Then shift it in the “P” position, and run the engine at idling speed.
1) Yellow handle
1) HOT range
2) COLD range
3) Upper level
4) Lower level
4. Pull out the level gauge and check the fluid level on the gauge. If it is below the lower level on the “HOT” range, add the recommended automatic transmission fluid up to the upper level.
Checking the fluid level
The automatic transmission fluid expands largely as its temperature rises; the
fluid level differs according to fluid temperature. Therefore, there are two different
scales for checking the level ...
Checking the fluid level when the fluid is cold
When the fluid level has to be checked without time to warm up the automatic
transmission, check to see that the fluid level is between the lower level and upper
level on the “COLD” range. If ...
See also:
Lumbar support
The curvature of the seat backrest can be adjusted
in such a way that it supports the lumbar
region of the spine. The lower back and the
spine are supported for upright posture.
▷ Press ...
Maintenance requirements
Your NISSAN has been designed to have minimum maintenance requirements with long
service intervals to save you both time and money.
However, some day-to-day and regular maintenance is essential to ...
Center Console Storage
Push the button (A) to access the storage or accessory power outlet under the armrest.
See Power Outlets for more information.
Some vehicles might also have input jacks for auxiliary devices ...
