Toyota Camry: Checking and replacing fuses - Do-it-yourself maintenance - Maintenance and care - Toyota Camry Owners ManualToyota Camry: Checking and replacing fuses

If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary.

  1. Vehicles without a smart key system: Turn the engine switch off.
    Vehicles with a smart key system: Turn the “ENGINE START STOP” switch off.
  2. Open the fuse box cover.

Engine compartment
Engine compartment

Push the tabs in and lift the lid off.

Under the instrument panel
Under the instrument panel

Remove the lid.

  1. After a system failure, see “Fuse layout and amperage ratings” for details about which fuse to check.
  2. Remove the fuse.

Only type A fuse can be

Only type A fuse can be removed using the pullout tool.

  1. Check if the fuse has blown.

Type A

  1. Normal fuse
  2. Blown fuse

Replace the blown fuse with a new fuse of an appropriate amperage rating. The amperage rating can be found on the fuse box lid.

  1. Normal fuse
  2. Blown fuse

Replace the blown fuse with a new fuse of an appropriate amperage rating. The amperage rating can be found on the fuse box lid.

Type C

  1. Normal fuse
  2. Blown fuse

Contact your Toyota dealer.

If the key battery is depleted
The following symptoms may occur: ●The smart key system and wireless remote control will not function properly. ●The operational range will be reduced. CAUTION ■Removed battery ...

Fuse layout and amperage ratings
■ Engine compartment Fuse block Fuse block on the back of the cover *1: 3.5 L V6 (2GR-FE) engine *2: 2.5 L 4-cylinder (2AR-FE) engine *3: Vehicles with halogen headlight *4: Vehi ...

See also:

NISSAN Voice Recognition System (if so equipped)
NISSAN Voice Recognition allows hands-free operation of the systems equipped on this vehicle, such as phone and vehicle information. There are two voice recognition modes of operation available. Th ...

Checking the coolant level
Only check the coolant level when the vehicle is on a level surface and the engine has cooled down. Turn the SmartKey to position 2 in the ignition lock. On vehicles with KEYLESS-GO, press the ...

Setting the airflow
Dual-zone automatic climate control •► Turn the SmartKey to position 2 in the ignition lock. •► To increase/reduce: press button 11 up or down 3-zone automatic climate control ...