Nissan Maxima: Checking bulbs - Instruments and controls - Nissan Maxima Owners ManualNissan Maxima: Checking bulbs

With all doors closed, apply the parking brake and place the ignition switch in the ON position without starting the engine. The following lights will come on:

If equipped, the following lights come on briefly and then go off:

If equipped, the following lights come on briefly and then go off:

If any light fails to come on, it may indicate a burned-out bulb or an open

If any light fails to come on, it may indicate a burned-out bulb or an open circuit in the electrical system. Have the system repaired promptly.

    Warning/indicator lights and audible reminders
    Warning/indicator lights and audible reminders ...

    Warning lights
    For additional information on warnings and indicators, see Vehicle information display later in this section.  Anti-lock Braking System (ABS) warning light When the ignition switch is pla ...

    See also:

    Tire size designation, load-bearing capacity and speed rating
    1. Tire width 2. Nominal aspect ratio in % 3. Tire code 4. Rim diameter 5. Load bearing index 6. Speed rating Tire data is vehicle-specific and may deviate from the data in th ...

    Vehicle operation outside the USA and Canada
    If you plan to operate your vehicle in foreign countries, please be aware that:  - service facilities or replacement parts may not be readily available.  - unleaded fuel for vehicles w ...

    Automatic locking feature
    The vehicle locks automatically when the ignition is switched on and the wheels of the vehicle are turning at a speed of more than 9 mph (15 km/h). You could therefore be locked out when: - ...