Ford Fusion: Cleaning the interior - Vehicle care - Ford Fusion Owners manualFord Fusion: Cleaning the interior

Seat belts

WARNINGS:

Do not use abrasives, or chemicalsolvents to clean them.

Do not allow moisture to penetratethe seat belt retractor mechanism.

Clean the seat belts with interior cleaneror water applied with a soft sponge. Letthe seat belts dry naturally, away fromartificial heat.

Instrument cluster screens,LCD screens, radio screens

WARNING:

Do not use abrasives, alcoholicsolvents or chemical solvents toclean them.

    Cleaning the exterior
    WARNING: If you use a car wash with a waxingcycle, make sure that you removethe wax from the windscreen. CAUTIONS: Some car wash installations usewater at high pressure. This coulddamage certain pa ...

    Repairing minor paint damage
    CAUTION: Remove apparently harmless lookingsubstances from the paintworkimmediately (e.g. bird droppings, treeresins, insect remains, tar spots, road saltand industrial fall out). You should repair ...

    See also:

    Troubleshooting Tips
    If you are having trouble programming HomeLink , here are some of the most common solutions: • Replace the battery in the original hand-held transmitter. • Press the LEARN button on the Garage ...

    Notes for the entry function
    ●Even when the electronic key is within the effective range (detection areas), the system may not operate properly in the following cases: • The electronic key is too close to the window or ...

    Changing, maintaining, and storing the speed
    The rocker switch can be pressed while the system is interrupted to maintain and store the current speed. DSC Dynamic Stability Control is switched on, if necessary. Adapting the desired speed ...