Subaru Legacy: Cruise control
Cruise control enables you to maintain a constant vehicle speed without holding your foot on the accelerator pedal and it is operative when the vehicle speed is 25 mph (40 km/h) or more.
WARNING
Do not use the cruise control under any of the following conditions. These may cause loss of vehicle control.
● driving up or down a steep grade
● driving on slippery or winding roads
● driving in heavy traffic
● towing a trailer
NOTE
● If you press the “CRUISE” main switch button while turning the ignition switch “ON”, the cruise control function is deactivated and the cruise control indicator light flashes. To reactivate the cruise control function, turn the ignition switch back to the “Acc” or “LOCK” position, and then turn it again to the “ON” position.
● Make sure the “CRUISE” main switch is turned off when the cruise control is not in use to avoid unintentionally setting of the cruise control.
- To set cruise control
- To temporarily cancel the cruise control
- To turn off the cruise control
- To change the cruising speed
- Cruise control indicator light
- Cruise control set indicator light
Parking tips
When parking your vehicle, always perform the following items. ● Apply the parking brake. ● For MT models, put the shift lever in the “1” (1st) for upgrade or “R” (Reverse) for ...To set cruise control
1. Press the “CRUISE” main switch button. The cruise control indicator light on the combination meter will illuminate. 2. Depress the accelerator pedal until the vehicle reaches the desired ...See also:
Towing This Vehicle Behind Another Vehicle
...
Checking and adding oil
Location of the filler cap and dipstick
Volvo recommends Castrol oil products
NOTE
Before checking the oil:
The car should be parked on a level surface.
If the engine is warm, wait f ...
Wiper Blades
Wiper blades need to be cleaned
and kept in good condition to
provide a clear view.
• Signs of wear include streaking,
skipping across the windshield,
and worn or split rubber.
• Trained ...