Mercedes-Benz E-Class: Cruise control lever
1. To switch on or to increase the speed
2. To switch on or to reduce the speed
3. To deactivate cruise control
4. To switch on with the current speed or
with the last stored speed
When you activate cruise control, the stored speed is shown in the multifunction display for five seconds. In the multifunction display, the segments between the stored speed and the maximum speed light up.
Important safety notes
Cruise control maintains a constant road speed for you. It brakes automatically in order to avoid exceeding the set speed. On long and steep downhill gradients, especially if the vehicle is la ...Storing and maintaining the current speed
You can store the current speed if you are driving faster than 20 mph (30 km/h). •► Accelerate the vehicle to the desired speed. •► Briefly press the cruise control lever up 1 ...See also:
Trip 1 and Trip 2
This display shows the current
distance traveled, in either
kilometers (km) or miles (mi), since
the last reset for the trip odometer.
The trip odometer can be reset to
zero by pressing SET/C ...
Clutch Fluid
Manual transmission only
The fluid level should be between
theMINandMAXmarks on the side
of the reservoir. If it is not, add
brake fluid to bring it up to that level.
Use the same fluid spec ...
General notes
WARNING
All categories of messages contain important information which should be taken
note of and,
where a malfunction is indicated, addressed as soon as possible at an authorized
Mercedes ...